LINDY USB Extension - CAT5 USB Extender Premium (Up to 50m)

Using standard CAT5/5e/6 network cable, the CAT5 USB Extender Premium allows the distance between a USB device and a host computer to be extended to incredible lengths, without the need for an external power supply. With its advanced chipset design it's especially suitable for use with USB 1.1 multimedia devices such as whiteboards and webcams. For most standard devices, including printers, scanners, USB 1.1 webcams etc., it can extend the connection distance by up to 50m. For certain low speed devices, such as keyboards and mice, this can be increased to up to 100m. The USB Extender Premium consists of a local unit with a USB Type A Male (host computer side) and a remote unit (device side) with a built-in USB Type A Female connector. A low cost network patch cable (not included) is required to connect the two units together. Simple to install - "Plug & Play" Compliant with USB 1.1 specification, OHCI and UHCI Extends a single USB port up to 50m using low cost CAT5/5e/6 network cable (not included, to see our range) Advanced chipset design - ideal for use with USB 1.1 whiteboards, webcams etc. Certain low speed USB devices may work up to 100m Bus-powered - no external power supply required for local or remote unit Connectors: Local unit: Type A USB Male & RJ-45 Female Remote unit: Type A USB Female & RJ-45 Female Stylish transparent plastic housing with silver internal coating 100% compatible with USB hubs and other devices Compatible with all major USB enabled operating systems Please Note: The USB standard allows a maximum of 5 hubs to be used between a host computer and a device. Depending on the length of the cable used, this CAT5 USB Extender introduces a signal delay equivalent to 2 hubs over 20m; 3 hubs over 30m; and 5 hubs over 50m. Therefore, when using a 50m cable with this Extender, no extra hubs or extension cables can be used between the computer and the device.