KRAMER KRAMER VP704XL SVGA XGA SXGA UXGA SCAN CONVERTOR

The VP-704xl isa scan converter for computer graphics video signals. It convert acomputer graphics video signal up to 2048x2048 or an HDTV signal to twocomposite, two s-Video (Y/C) and component video signals simultaneouslyin either PAL or NTSC formats. AutoTrak

Auto Set Up Technology - One button auto setup that automaticallysizes, shifts, and centers any input image on the display deviceInput Compatibility - Up to 2048x2048 at 150Hz or 1080p.Multi-Standard Output - PAL or NTSC (selectable).Video Mixing, Keying & Fading - Superimpose the down convertergraphics computer video image on top of an existing video signalInputs - 15-Pin HD or 5 BNC for Computer Graphics or HDTV Signals. CV & Y/C for video Overlay of scan converted signalLooping 15-Pin HD inputPicture-In-PictureOutputs - 2 CV, 2 Y/C, & 1 RGB/YUVBuilt-In Proc Amp - Brightness, contrast, color, hue (NTSC only)Flicker Reduction - 2, 4 or 6-line Flicker reduction (selectable)Freeze FrameFront Panel Lock Out Aspect Ratio - 3 settingsZoom & Pan - 300%Genlock Output to Input Source - On/offControl - RS-232 & IR remote (included) with on-screen displayStandard 19

Rack Mount Size - 1U Specifications COMPUTER INPUT: Analog RGB/YPbPr on 15-Pin HD connectors into 75Ohm, supporting RGBHV, RGsB, YPbPr, auto-terminating into 75Ohm Digital sync (in RGBHV mode): TTL Level, 10K termination, pos or negativeAnalog sync (in RGsB, YPbPr, YUV modes): 0.3V negative.RGB Level Range: 0.5-2.0VppScan Rate Detection: automaticPC Resolutions: any up to 2048x2048HDTV Resolutions: any up to 1080pMax horizontal scan rate: 150kHz VIDEO INPUTS: Composite video on BNC connectors.S-Video (YC) on 4-Pin mini-DIN connectors.CV/YC video decoder: 8-bit Digital Input impedance: 75OhmTelevision standards supported: NTSC and PALDe-Interlacing (NTSC / PAL): pixel-level motion adaptive Comb filter decoding: adaptive Film mode (NTSC) 3:2 pull downCV/YC Video adjustments: contrast, brightness, saturation, hue (NTSC