A really interesting product, this unit monitors a pair of normally open contacts and sends X10 commands when it detects a change. This can be triggered by closure of the contacts, or even a low voltage (6-18V AC, DC or speaker level audio).There are three modes of operation:Mode 1: it sends ALL LIGHTS ON to the house code plus and appliance ON to the same address the interface is set to. When the contacts are opened it sends an OFF command to the appliance but leaves the lights ON.Mode 2: it sends and ALL LIGHTS ON/OFF flashing command and leaves them ON after the contacts are opened.Mode 3: it sends an ON command to one address, and an OFF to the same address when the contacts are opened again.There are many uses for this device. For example; Connect it to your burglar alarm panel and have all your house lights flashing on and off in an alarm condition. Connect it to a magnetic switch to turn on lights when a door opens.Connect it to your doorbell to trigger lights, sirens or whatever you like.If you like to experiment with electronics you can cause trigger conditions using lights sensors, moisture sensors, microphones etc.
MARMITEK X10 SM10E POWERFLASH UNIVERSAL INTERFACE
from MARMITEK£ 35.99 Inc. VAT
In stock
Product sold by: Keene Retail
See all products sold by Keene Retail
Dispatched within: 5 day(s)
Shipping fees: £ 4 Inc. VAT
Facebook
Twitter
Youtube
Google+
100% secured payment
