Network Cable Tester SM-8868

Cable tester with LCD display that shows the results oben in a clear and complete. From the main menu displays the following 4 functions: Mapping Wire: Get the continuity for each of the cable wires and pin-out of them. The result is a pin-out chart display with pin pin-A-B or error for each of the pins. It also shows those cases where two or more threads. Cable Length: Function that calculates the length of a cable. Technology has TDR (Time Domain Reflectometer) which measures the distance from the cable and the distance to a possible error if any. In this way you can repair damaged cables already installed without having to reinstall a whole new cable. Operates at peer level. - Scan Cable: To check phone cables USB and coaxial. Check continuity. Calibrarion: Configuracióm and calibration of the Network Cable Tester. Specifications - LCD 128 x 64 pixels (48 x 32 mm). Size: 149 x 66 x 23 mm. Compatible with UTP FTP STP Cat.5 Cat.5e Cat.6 BNC coaxial USB TEL. The central unit has two RJ45 female connectors (Main and loopback) to test UTP cables are not installed (leads). It also supports USB A female connectors BNC RJ11 female and female. The remote terminator RJ45 connectors have female RJ11 female USB B female and BNC female. Supplied with cable lozalización probe. The central unit transmits a frequency determined by the probe detects cable. Useful for detection of broken wires in cables already installed or to locate cables in patch panel. The central unit has 4 buttons. Operates on 9 VDC battery type.